3D assembly guide · SimXPro XT120 V2 with CoreBolt
Build your SimXPro XT120 V2. Step by step.
Nine steps from box to cockpit. Watch every profile, plate and bolt move into place in 3D, and see how the hidden CoreBolt joints go together.
You've got this.
- Steps
- 9
- Profiles
- 15
- Footprint
- ± 1300 × 650 mm
- Joints
- CoreBolt
T-handle hex keyLong side to turn bolts in and through the Ø6.5 mm CoreBolt holes. Short side for the final turn.
Drilled positionsThe holes show you where the cross profiles go.
Two peopleThe big base profiles are easier to handle together.
Sort firstProfiles by length, hardware by size.
Interactive manual
Assembly in 3D
Drag to rotate · Right-click to move · Scroll to zoom · Arrow keys for steps
Loading the 3D model…
New generation · SimXPro XT120 V2
CoreBolt. Hidden joints, clean lines.
The base frame joints of the new SimXPro XT120 V2 go together without brackets or T-nuts. Each bolt sits inside the profile, and you tighten it through a small access hole.
That's it.
1
Turn inTurn two M8×16 bolts part-way into the end of the cross profile.2
Slide inSlide the bolt heads into the grooves of the base profile from the rear end, the shortest way.3
Line upMove the cross profile to its drilled hole. The hole tells you where.4
TightenHex key through the Ø6.5 mm hole and tighten. The heads stay out of sight.
Not built yet?
SimXPro XT120 V2
Built for 30 Nm+ direct drive wheelbases and 300 kg+ pedal forces. The permanent core of a no-compromise simulator, with a 5-year cockpit warranty.
€669,00
€789,99
- Shipping to 40 countries
- 5-year warranty
- MOZA and Fanatec bundles