SIMAGIC Alpha EVO Ultra 28 Nm – Flagship torque capacity with an expanded SIMAGIC control platform.
The SIMAGIC Alpha EVO Ultra 28 Nm Direct Drive Wheel Base is the highest-output choice in this Alpha EVO lineup. Built for a dedicated PC cockpit, it combines a 28 Nm rating with low-inertia motor engineering and an expanded connection platform. It suits experienced enthusiasts planning their steering, mounting and peripherals as a complete system, with the freedom to tune the driving strength well below the base's maximum output.
Why choose this product?
-
28 Nm maximum torque: the highest rating among these four Alpha EVO models.
-
Low-inertia engineering: rotor design balances torque capability with responsive steering.
-
Expanded connectivity: 11 connection ports with CAN, CAN FD and USB support.
-
Active cooling: airflow and thermal control support high-load use.
-
Included kill switch: an external control forms part of the supplied package.
Product details
A flagship built around more than steering weight
The Ultra provides additional output capacity for demanding cockpit plans. Its rotor engineering is intended to keep rotational inertia low while providing substantial torque. That makes it interesting for drivers who want a strong base that can be tuned to their preferred range. As with any wheelbase, the feel depends on the wheel, software settings and the quality of the force-feedback signal.
Use the torque range deliberately
You do not need to run 28 Nm to make use of the Ultra. Begin at a conservative strength and develop the profile around your ability to read cornering load, texture and direction changes. Pay attention to clipping in the game and avoid a setting that makes every strong event feel identical. Higher capability provides tuning options; your comfortable driving level remains the deciding factor.
An expanded connection platform
SIMAGIC lists 11 connection ports and support for CAN, CAN FD and USB. The Ultra supports compatible newer steering wheels and legacy SIMAGIC devices, as well as supported third-party USB wheels through the optional QR-A arrangement. Check the specific device, protocol and required adapter before building the connection plan. A matching physical plug alone does not confirm compatibility.
Active cooling and aluminium construction
The Ultra uses an actively cooled, die-cast aluminium chassis. Its manufacturer dimensions are 359 × 130 × 110 mm, with an 11 kg net weight. Allow room for airflow and the cable connections when setting the wheelbase position. Check the supporting cockpit and mounting arrangement carefully before applying higher forces.
Control and installation as part of the package
Use the supplied external kill switch as described in SIMAGIC's instructions and position it within reach. Install the supported SimPro Manager release, configure the steering range and verify controls before driving. Bottom, side and front mounting are supported through the appropriate arrangements. Front brackets can obstruct magnetic connectivity, so review the intended accessories before deciding on that installation.
Build a system you can use consistently
For a high-output setup, the seating position, pedal support and steering-wheel choice deserve the same attention as the base. Start with a comfortable posture, then tune steering effort around it. Save separate profiles for wheel and car combinations, and revisit them after any hardware change. A repeatable setup helps you judge the car rather than constantly adapting to different control settings.
Compatibility and setup
The Ultra accepts supported SIMAGIC steering wheels through their specified interfaces. Third-party wheel use requires the correct mechanical quick release and supported USB/QR-A connection arrangement; check power, buttons and display requirements individually.
Download the current SIMAGIC SimPro Manager software and follow the model's installation guide. Check firmware, steering calibration and game controls before your first drive. SIMAGIC advertises native 360 Hz iRacing force-feedback support; using it depends on the relevant software, firmware and simulator configuration.
Use a mounting solution appropriate to the Ultra's dimensions, weight and output. Side or front brackets and desk fixtures are optional accessories; check fitment and the rigidity of the complete installation.
Recommended products for your 28 Nm setup
-
Formula and prototype-style controls: SIMAGIC FX Pro V2 is a steering-wheel option for this SIMAGIC setup. Choose a control layout that suits your cars and confirm the required wheel connection.
-
Complete the pedal controls: SIMAGIC P1000 three-pedal set adds accelerator, brake and clutch inputs. Configure the pedals through their supported connection and check your cockpit's pedal mounting.
-
Profile cockpit installation: consider the SIMAGIC Alpha EVO MB-S Side Mount Brackets for a suitable side-mount arrangement. Check profile spacing, fasteners and clearance for your exact cockpit.
Compare the Alpha EVO range
If you do not need the Ultra's output and connection platform, compare the Alpha EVO Pro 18 Nm, Alpha EVO 12 Nm and Alpha EVO Sport 9 Nm. Choose around the entire cockpit, rather than torque alone.
Specifications
Model
SIMAGIC Alpha EVO Ultra 28 Nm
Drive system
Direct drive; ultra-low-inertia servo motor
Maximum torque
28 Nm
Encoder
21-bit
Force-feedback filtering
Dynamic Force Domain Filter (DFDF)
Cooling
Active cooling
Housing
Die-cast aluminium
Dimensions (L × W × H)
359 × 130 × 110 mm
Manufacturer net weight
11 kg
Software
SIMAGIC SimPro Manager
Intended platform
PC sim racing
Quick-release ecosystem
SIMAGIC QR50 / QR70; optional QR-A for supported third-party wheels
Connection platform
11 ports; CAN, CAN FD and USB
What's in the box?
- Alpha EVO Ultra wheelbase
- 2 × Installation kits
- External kill switch
- Power adapter
- USB Type-A to Type-B cable
- USB Type-C cable
- RJ45 to RJ11 cable
Steering wheel, pedals and optional mounting brackets are purchased separately. Small installation components may vary between production batches.
Frequently asked questions
Do I need to drive at the full 28 Nm?
No. The Ultra's rating describes available torque capability. Use a comfortable output and balance it with your simulator's settings.
What is different about the Ultra's connections?
SIMAGIC lists 11 ports and support for CAN, CAN FD and USB, allowing compatible current and legacy devices to be used through their supported connections. Check each device's requirements before installation.
Is a kill switch included?
Yes. SIMAGIC lists an external kill switch in the Ultra package. Install and use it according to the manufacturer's instructions.
Can I install a front bracket with magnetic accessories?
Check the mounting guidance first. SIMAGIC warns that front mounting plates can block magnetic connectivity; a different mounting arrangement may suit those accessories better.
Is a steering wheel included?
This listing is for the wheelbase. Choose a compatible steering wheel separately, or check a specifically listed wheelbase-and-wheel bundle.
Can I use this wheelbase with a console?
This description covers the supported PC setup. Do not assume native PlayStation or Xbox operation; any converter arrangement requires separate checks for the exact devices, software and console.
Please note: we make every effort to display products as accurately as possible. Colours, materials and finishes may vary slightly in real life due to studio lighting, screen settings, ambient light and product characteristics.
